Anti Corrosion Rust Stone Chip Protector for Car Care Coating

Basic Info.

Model NO.	TC105
Paint Film Property	Heat-Resisting Paint
Method	Spray
Level	Finish Coat
Certification	ISO14001, ISO9001
Substrate	Steel
Components	Film Forming Matter
Formation Mechanism	Non Conversion Type
Transport Package	Box
Specification	1L
Trademark	WEIDISHI
Origin	China
HS Code	3402
Production Capacity	800000PCS/Month

Product Description

With IATF16949 approvedIt is widely used in battery packs of energy vehicles, fuel tanks of fuel vehicles/important vehicle bottom parts of high-speed railways, and has better anti-corrosion and anti-stone impact effects. The product quality is stable and reliable. There are many mature cases of manual painting and machine painting.

Product Description:

This product offers lasting and flexible protection from stone chipping and corrosion. It's based on a combination of rubber and resin with a roar-preventing effect. Clean and easy use inside and outside. It also has good performance on sound insulating and noise reducing, widely applied in the auto manufacturing and car care industries. Also deadens droning noises from the engine bay, door shells, luggage compartments and other hollow sections.Features:

· Prevent rust

· Deadens sound

· Waterproof, elastic

· Will not crackDirections:

1.Clean the base area thoroughly, which should be clean dry and free of dust, oil, grease and wax, etc;

2. Cover the other parts tightly;

3. Spend two minutes to shake the can evenly, open the lid, remover the seal and insert the special designed spray gun onto the mouth, collect the 0.6-0.8MPa compressed air, finally spray onto the surface at a distance of 25cm;

4. To avoid the flow line or sagging, three times spraying are needed. After the first time spray, flatten and fill the cracks and caves with metal seal-glue. Every interval should be not less than 15 minutes, best noise deaden effect need more than 1.5mm thickness.

5. Before drying, petrol is allowed to clean.

Precautions:

1. Inflammable, spray in a ventilated area, keep far from heat and fire.

2. Work under personal protection with glasses, mast and gloves. If uncomfortable when touch the product, please go to a doctor.

3.If it's the first time to use this product ,it's better to confirm the best operating methods.